Hot Melt test to seal a safety flicker light.
I placed a flicker safety light into melted, Hot-Melt Reusable Peel-Away Coating Style E, 1 lb, 350 Degree F Dipping Temerature 7762T11 $4.57 Each. I used the bottom of a cut-off soda can and melted the material with a heat gun. The light did not fair too well as it began to melt as I placed it into the Hot-Melt. I can't seem to get it to turn on anymore.
--Tom Owens, Dec. 11, 2005