For this weeks's assignment, Neil asked the class to create a network between identical boards (#14) with a light as input and a button as output. As a challenge, he asked the class to build a network between the serial bridge (#15) and Internet 0.

After building the the board containing the hubs and the two others holding the LED and push button, I attempted to test them. Strangely enough they were both able to transmit, but unable to receive. I used the voltmeter to see if there was power in specific locations on the boards. And there were. Unable to solve the problem, I handed this assignment in as is. Unfortunately I didn't have enough time to attempt to build a network between the serial bridge and Internet 0... maybe next time.