If you want to use this tool, I highly recommend opening the software, looking at the index on the left hand column (blue), and going to NextWiki->Help->Training and watching the webinar that shows up in the right hand pane ("Introduction to NextEngine ScanStudio"). You might need to refresh the window to get the video to play properly (just minimize and remaximize the window). 
<br><br>
this is our setup:<br>
<img src = "ne_setup.JPG" width = 100%></img>
<br><br>
the software is here:<br>
<img src = "ne_icon.JPG" width = 10%></img>
<br>
ignore this:<br>
<img src = "ne_error.JPG" width = 50%></img>
<br>
if it comes up, just try again, it seems that it doesn't always decide to scan the hardware specs or something.
<br>
<br>
try to not put your eyeball where this camera was:<br>
<img src = "ne_laser.jpg" width = 50%></img>
<br>
fasten your seatbelt for this part:<br>
<img src = "ne_fuss.jpg" width = 100%></img>
<br>
and note that you need to play with these settings for the scan to work<br>
<img src = "ne_settings.JPG" width = 50%></img>