// Arduino 7 segment display example software
// http://www.hacktronics.com/Tutorials/arduino-and-7-segment-led.html
// License: http://www.opensource.org/licenses/mit-license.php (Go crazy)
 
// Define the LED digit patters, from 0 - 9
// Note that these patterns are for common cathode displays
// For common anode displays, change the 1's to 0's and 0's to 1's
// 1 = LED on, 0 = LED off, in this order:
//                                    Arduino pin: 2,3,4,5,6,7,8
byte seven_seg_digits[10][7] = { { 0,0,0,0,0,0,1 },  // = 1
                                 { 1,0,0,1,1,1,1 },  // = 0
                                 { 0,0,1,0,0,1,0 },  // = 0
                                 { 0,0,0,0,1,1,0 },  // = 3
                                 { 1,0,0,1,1,0,0 },  // = 4
                                 { 0,1,0,0,1,0,0 },  // = 5
                                 { 0,1,0,0,0,0,0 },  // = 6
                                 { 0,0,0,1,1,1,1 },  // = 7
                                 { 0,0,0,0,0,0,0 },  // = 8
                                 { 0,0,0,1,1,0,0 }   // = 9
                                 };

void setup() {    
  for (int i = 12; i > 5; i--) {
    pinMode(i, OUTPUT);
  }
/*  
  pinMode(2, OUTPUT);   
  pinMode(3, OUTPUT);
  pinMode(4, OUTPUT);
  pinMode(5, OUTPUT);
  pinMode(6, OUTPUT);
  pinMode(7, OUTPUT);
  pinMode(8, OUTPUT);
  pinMode(9, OUTPUT);
  */
}
    
void sevenSegWrite(byte digit) {
  byte pin = 12;
  for (byte segCount = 0; segCount < 7; ++segCount) {
    digitalWrite(pin, seven_seg_digits[digit][segCount]);
    --pin;
  }
}

void loop() {
  //byte count = 9;
  for (byte count = 10; count > 0; --count) {
   delay(1000);
   sevenSegWrite(count - 1); 
  }
  //delay(4000);
}