#include <SoftwareSerial.h>

SoftwareSerial mySerial(0, 2); // RX, TX from point of view of chip

int analogPin = 3;     // potentiometer wiper (middle terminal) connected to analog pin 3 -- Physical pin 3
                       // outside leads to ground and +5V
int val = 0;           // variable to store the value read

void setup()
{
  mySerial.begin(9600);          //  setup serial
}

void loop()
{
  val = analogRead(analogPin);    // read the input pin
  mySerial.println(val);             // debug value
  delay(1000);
}