This weeks project involves making a boogie board.
The original design involved wooden strips that would be woven with each other.
This would result in a stronger structure. Furthermore, the embedded cavities would
reduce the weight of the board. The strips assemble with each other so that the
cavities are covered after the board assemblage.
Board Design
Strips Design
Cavity Design
Final Design
Unfortunately, since the original design was really complicated there
was no time to cut it. Therefore, a simple solid board was cut.
Aligning the bottom and top part was one of the hardest parts of this design. I used
a circle as a reference before moving to the cut.
Sanding the board was important for a smoother result.
Final product
