How to Make (almost) Anything

08 Composite

My vision was to make a waterproof structure where you can put small objects to dry and let the water drop to a sink

I made the mold using a desktop shopbot. I had a little bit of problem (picture on the bottom) but it turned out to be not too bad.

Procedure: Mold  -> Wax or Wrap -> Fabric + Epoxy -> Pink Plastic Layer with Holes -> Cotton -> Compress

Unpacking Process. I had to cut residual parts and sand the edges to make them smooth.

Its envisioned use in bathroom or kitchen.

Copyright © 2014 Sang-won Leigh