Anduino ATK >NAME >VALUE >NAME >VALUE 1 >NAME >VALUE >NAME >VALUE <b>OMRON SWITCH</b> >NAME >VALUE 1 2 3 4 >NAME <b>LEDs</b><p> <author>Created by librarian@cadsoft.de</author><br> Extended by Federico Battaglin <author>&lt;federico.rd@fdpinternational.com&gt;</author> with DUOLED <b>CHIPLED</b><p> Source: http://www.osram.convergy.de/ ... LG_LY N971.pdf >NAME >VALUE <b>Design Rules for Fab Lab</b> <p> Optimized for the 1/64th endmill. Using 17mil for the clearance instead of the absolute minimum of 15.625mils is an easy way to avoid PNG resolution issues. You can drop the clearance to 15.75 or 16 mils if you want but make sure to inspect the path! </p> <p> The minimum width is set at 10 mils for now. You can go down to 6, but only if you have a really good reason. By default, use wide traces (such as 16 mils). </p>