>NAME >VALUE >NAME 1 >NAME >VALUE PIN HEADER >NAME >VALUE 1 RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE >NAME >VALUE CAPACITOR >NAME >VALUE >NAME >VALUE LED 1206 pads (standard pattern) >NAME >VALUE LED1206 FAB style (smaller pads to allow trace between) >NAME >VALUE 5mm round through hole part. >NAME >VALUE OMRON SWITCH >NAME >VALUE 1 2 3 4 1 >NAME >VALUE >NAME >VALUE >NAME >VALUE (Black) (Green) >NAME >VALUE MISO SCK RST VCC MOSI GND >NAME >VALUE non-polarized capacitor >NAME >VALUE LED >NAME >VALUE >NAME >VALUE >NAME >VALUE Resistor (US Symbol) Variants with postfix FAB are widened to allow the routing of internal traces LED OMRON SWITCH Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE SUPPLY SYMBOL