Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL Small Outline Package >NAME >VALUE Dual In Line Package >NAME >VALUE HP-VFQFP-N20 Micro Lead Frame package (MLF) >NAME >VALUE Hyper TOPLED® Source: http://www.osram.convergy.de/ >NAME >VALUE R A B G 1 >NAME >VALUE PIN HEADER >NAME >VALUE 1 RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE >NAME >VALUE >NAME CAPACITOR >NAME >VALUE Ceramic Chip Capacitor KEMET 1206 reflow solder Metric Code Size 3216 >NAME >VALUE >NAME >VALUE OMRON SWITCH >NAME >VALUE 1 2 3 4 >VALUE >NAME >NAME >VALUE >NAME >VALUE MISO SCK RST VCC MOSI GND >NAME >VALUE (Black) (Green) >NAME >VALUE >NAME >VALUE >NAME >VALUE OSRAM Hyper Multi TOPLED® Hyper-Bright LED LATB T686 Source: http://www.osram.convergy.de/ Resistor (US Symbol) Variants with postfix FAB are widened to allow the routing of internal traces OMRON SWITCH