Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL Small Outline Package >NAME >VALUE Dual In Line Package >NAME >VALUE HP-VFQFP-N20 Micro Lead Frame package (MLF) >NAME >VALUE Hyper TOPLED® Source: http://www.osram.convergy.de/ >NAME >VALUE R A B G RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE >NAME >VALUE 1 >NAME >VALUE PIN HEADER >NAME >VALUE 1 CAPACITOR >NAME >VALUE Ceramic Chip Capacitor KEMET 1206 reflow solder Metric Code Size 3216 >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE MISO SCK RST VCC MOSI GND >NAME >VALUE (Black) (Green) >NAME >VALUE OSRAM Hyper Multi TOPLED® Hyper-Bright LED LATB T686 Source: http://www.osram.convergy.de/ Resistor (US Symbol) Variants with postfix FAB are widened to allow the routing of internal traces Allegro MicroSystems, Inc www.allegromicro.com <author>Created by librarian@cadsoft.de</author> 3-pin SOT23W LH Source: http://www.allegromicro.com/en/Products/Packaging/pkgso2.pdf >NAME >VALUE Type: 3-pin SIP, conventional leadframe Source: http://www.allegromicro.com/en/Products/Packaging/pkghall1.pdf >NAME >VALUE >NAME >VALUE Linear Hall Effect Sensor ICs Continuous-Time Ratiometric High-Temperature Operation Programmable Linear with Analog Output A1302 -Replacement- UGN3503 Source: http://www.allegromicro.com/en/Products/Part_Numbers/1301/1301.pdf http://www.allegromicro.com/en/Products/Part_Numbers/1321/1321.pdf http://www.allegromicro.com/en/Products/Part_Numbers/1381/1381.pdf