Fits EIAJ packages (wide version of the SOIC-8). >VALUE >NAME Dual In Line >VALUE >NAME DIODE diameter 2.54 mm, horizontal, grid 10.16 mm >NAME >VALUE SMALL OUTLINE DIODE >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR >NAME >VALUE 2x5SMD >NAME >VALUE USB Series A Hole Mounted >NAME PCB Edge USB Series A Surface Mounted >NAME USB Series Mini-B Hole Mounted >NAME USB Series B Surface Mounted >NAME USB Series Mini-B Surface Mounted >VALUE >NAME USB Series B Hole Mounted >NAME >VALUE USB Series Mini-B Surface Mounted >NAME >VALUE Card-edge USB A connector. For boards designed to be plugged directly into a USB slot. If possible, ensure that your PCB is about 2.4mm thick to fit snugly. >Name >Value USB Series B Hole Mounted >NAME >VALUE >NAME >NAME >NAME >VALUE >NAME >VALUE Micro USB Package >NAME >VALUE >NAME PCB Edge >NAME PCB Edge >Value >Name >NAME >VALUE >NAME >VALUE >NAME >VALUE MISO SCK RST VCC MOSI GND >VALUE >NAME >NAME >VALUE USB Atmel 8-pin 2/4/8kB flash uC zener diode FTDI connector smd unpolarized_capacitor USB Connectors USB-B-PTH is fully proven SKU : PRT-00139/CONN-08278 USB-miniB is fully proven SKU : PRT-00587 USB-A-PCB is untested. USB-A-H is throughly reviewed, but untested. Spark Fun Electronics SKU : PRT-00437 USB-B-SMT is throughly reviewed, but untested. Needs silkscreen touching up. USB-A-S has not been used/tested USB-MB-H has not been used/tested USB-MICROB has been used. CONN-09505 >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL