Design for t45 with rivets (not currently reccommended!)

• Rivet tests
• Eagle File rivet test
• holes for the rivet test.
• outline for the rivet test.

Best results for small rivets with r=18, w=0.009 (nominal 0.036" diam.) on modela, using fabmodules.org. Best results for small rivets with r=16, w=0.008 (nominal 0.032" diam.) on shopbot desktop using new fabmods. Note disparity between two machines or between versions of mods.

• Eagle File Board using rivets
• traces for board. Pads have been enlarged, so that holes can be drilled without blowing away all the copper.
• holes for board.
• outline for the board.