## Hey all! ___ ### My name is Nolan. ___ I'm a third-year undergraduate student at MIT in Course 6-2, and one who is fortunate enough to be enrolled in MAS.863 this semester no less! This page is set up to document my working process as I go through How To Make (Almost) Anything, including, though most certainly not limited to pitfalls, both common and uncommon (though all of which I have personally fallen into), trials, and of course, tribulations. ___ <a href="weeks/00/index.html"> ### Final Project </a> <a href="weeks/01/index.html"> <img src="weeks/01/img/snake_product.jpg"></img> ### Computer Assisted Cutting </a> ___ <a href="weeks/02/index.html"> <img src="weeks/02/img/magnified.jpg"></img> ### Electronics Production </a> ___ <a href="weeks/03/index.html"> <img src="weeks/03/img/full_design.jpg"></img> ### 3D Printing & Scanning </a> ___ <a href="weeks/04/index.html"> <img src="weeks/04/img/sadboard.jpg"></img> ### Electronics Design </a> ___ <a href="weeks/05/index.html"> <img src="weeks/05/img/final.jpg"></img> ### Computer Controlled Cutting </a> ___ <a href="weeks/06/index.html"> <img src="weeks/04/img/eggpcb.jpg"></img> ### Embedded Programming </a> ___ <a href="weeks/07/index.html"> <img src="weeks/07/img/final_ring.jpg"></img> ### Molding and Casting </a> ___