Week 6 - Computer-Controlled Machining
2018, Oct 10
Notes:
- OSB (Oriented Strand Board) is cheap to start with
- Vendor: MCMaster-Carr, Home Depot
- Flat is usually better than ball end-mill
- Fixture: wood screw
- t-bone: remain some thin connection and pop off finally to make parts not move
- ShopBot
CNC
We are using Spiral down cut 1/4 shank
endmill to cut the OSB wood. The wood is 48”x96”x7/16”. Using Shopbot to cut.
I need a customized cabinet in my bedroom, so here’s the design and fabrication.