# 3d scanning and printing ## scans ###bootleg-o i scanned some legos using the spider handheld 3d scanner with the intent of producing "bootleg-os". these are screenshots of the raw scans and, superimposed with original texture/color and then rendered into planes. i could not get three scans i did to align.   ###doguu figurine i used the same scanner to model a doguu figurine, pre-historic clay artifacts from the jomon period in japan. this scan was much more successful than the lego one.   ## prints ###ship in a bottle the design i made for something which could not be produced subtractively, i printed a ship in a bottle. unfortunately, the filament does not print as transparently as i would like. apparently, this a problem that has plagued 3d printers since its inception.