# electronics design ## eagle ###schematic and pcb layout design my messy schematic  the board has two LED's and a push button switch as additions to the original design  ##pcb fabrication fresh out of the roland srm-20  post stuffing, on the right  ## acrylic experiment ###variegated vinyl i cut thin strips of vinyl using a paper cutter and arranged them side by side over a sticky substrate.  i then overlaid then burnished copper foil over the variegated area  after vinyl cutting my board design, i transferred the traces onto a rectangle of acrylic i milled   post stuffing   i later added smooth on epoxy finish to the top of the board to ensure the traces don't lift while plugging and unplugging connectors to the header pins