Electronics Production
My PCB - Printed Circut Board
Project Description
I slightly modified the layout of my last week's design. This week, we printed our digital circuit board design into physical circuit boards.
The printed picture above is the final succesfull outcome of the printed circuit board.
Final Documentation
Machine milling the PCB board.
Final Documentation
Running code to test if the led on the circuit board blink. Here I coneected it to pin number 6 and it works.
Final Documentation
Running code to test if the button work by blinking the led when you click on the button.
Process
Setting up the board in the modela
Using modules to controll the origin point
Start Milling
Finish Milling
The outcome was abit fuzzy, so I am zooming in to see how bad it is
Turns out it is pretty bad, so I reprinted another board and made sure the bit is new this time
Turned out pretty well !
Cleaned it up, and I started soldering
The led was a tricky part ! Since it have orientation. Have to look up online to see which side goes to ground
Finished soldering :D
PCD board
Running a program in it :D