hello_radio_016
hello_radio_016 assembled by Shelby Doyle
Board artwork for milling or etching:
hello_radio_016-top.png (Top layer image)
hello_radio_016-cutout.png (Cutout image)
Files needed to build:
hello_radio_016-sch.pdf (Schematic)
hello_radio_016-brd.pdf (Board layout)
hello_radio_016-assembly.pdf (Assembly diagram)
hello_radio_016-bom.txt (Bill of Materials)
Source code, boot loader, makefile:
makefile
hello_radio.hex
hello_radio.c
hal_hello_radio-016.h
ATmegaBOOT_168_pro_8MHz.hex
Eagle design files:
hello_radio_016.sch
hello_radio_016.brd
hello_radio_016.lbr
For
the top traces, use an 1/64" end mill with a diameter setting of 0.38
mm to ensure the toolpath is generated for all cutouts and isolations
$ png_path hello_radio_016-top.png hello-radio_016-top.path 1 0.38 4 0.5 0.5 # in out error diameter contours offset-overlap intensity
hello_radio_016-top.png @ 2400 dpi
For
the via drils and board cutout, use a 1/32" end mill with a diameter setting of 0.79 mm
$ png_path hello_radio_016-top.png hello-radio_016-top.path 1 0.79 4 0.5 0.5 # in out error diameter contours offset-overlap intensity
hello_radio_016-cutout.png @ 2400 dpi
Brian Mayton, David Cranor, Rehmi Post