(while powering from FTDI)

make -f hello.mic.45.make
sudo make -f hello.mic.45.make program-avrisp2

dhcp-18-111-104-176:desktop adammarblestone$ make -f hello.mic.45.make
avr-objcopy -O ihex hello.mic.45.out hello.mic.45.c.hex;\
   avr-size --mcu=attiny45 --format=avr hello.mic.45.out
AVR Memory Usage
----------------
Device: attiny45

Program:     568 bytes (13.9% Full)
(.text + .data + .bootloader)

Data:        201 bytes (78.5% Full)
(.data + .bss + .noinit)


dhcp-18-111-104-176:desktop adammarblestone$ sudo make -f hello.mic.45.make program-avrisp2
Password:
avr-objcopy -O ihex hello.mic.45.out hello.mic.45.c.hex;\
   avr-size --mcu=attiny45 --format=avr hello.mic.45.out
AVR Memory Usage
----------------
Device: attiny45

Program:     568 bytes (13.9% Full)
(.text + .data + .bootloader)

Data:        201 bytes (78.5% Full)
(.data + .bss + .noinit)


avrdude -p t45 -P usb -c avrisp2 -U flash:w:hello.mic.45.c.hex

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e9206
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "hello.mic.45.c.hex"
avrdude: input file hello.mic.45.c.hex auto detected as Intel Hex
avrdude: writing flash (568 bytes):

Writing | ################################################## | 100% 0.20s

avrdude: 568 bytes of flash written
avrdude: verifying flash memory against hello.mic.45.c.hex:
avrdude: load data flash data from input file hello.mic.45.c.hex:
avrdude: input file hello.mic.45.c.hex auto detected as Intel Hex
avrdude: input file hello.mic.45.c.hex contains 568 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.17s

avrdude: verifying ...
avrdude: 568 bytes of flash verified

avrdude: safemode: Fuses OK

avrdude done.  Thank you.

dhcp-18-111-104-176:desktop adammarblestone$ 

(after removing the ISP connection)

dhcp-18-111-104-176:desktop adammarblestone$ ls /dev/tty.*
/dev/tty.Bluetooth-Modem	/dev/tty.Bluetooth-PDA-Sync	/dev/tty.usbserial-FTF6JU97
dhcp-18-111-104-176:desktop adammarblestone$ python hello.mic.45.py /dev/tty.usbserial-FTF6JU97 

How this program manages to sample fast enough to record audio (300-3500 Hz): it uses a buffer

      //
      // free-running sample loop
      //
      for (i = 0; i < NPTS; ++i) {
         //
         // initiate conversion
         //
         ADCSRA |= (1 << ADSC);
         //
         // wait for completion
         //
         while (ADCSRA & (1 << ADSC))
            ;
         //
         // save result
         //
         array_lo[i] = ADCL;
         array_hi[i] = ADCH;
         }
      for (i = 0; i < NPTS; ++i) {
         //
         // send result
         //
         put_char(&serial_port, serial_pin_out, array_lo[i]);
         put_char(&serial_port, serial_pin_out, array_hi[i]);
         }