[
  ["wk1.html", "img/wk1_thumbnail.jpg", "Week 1", "My week 1 CAD project was to design my final project, which I thought would be a desktop CNC mill.  In SolidWorks, I designed a fairly complete CNC mill frame, complete with basic design for all 3 important moving parts. I also thought about how to increase the stability of the spindle, which I haven\"t really designed yet."],
  ["wk2.html", "img/wk2_thumbnail.jpg", "Week 2", "My week 2 project to design and fabricate a laser-cut cardboard construction kit involved a variety of parts intended to be able to make simplistic skeletal animals."],
  ["wk3.html", "img/wk3_thumbnail.jpg", "Week 3", "My week 3 project was to fabricate a Fab ISP, an in-system programmer for AVR microcontrollers.  I modified mine with a useful (if unorthodox) switch."],
  ["wk4.html", "img/wk4_thumbnail.jpg", "Week 4", "My week 4 3D printing project started out with a miniature replica of Rob\"s clamp, followed by a trinket designed on Antimony and finally the first joint of a pan-tilt muffin fan mount."],
  ["wk5.html", "img/wk5/wk5_thumbnail.jpg", "Week 5", "My week 5 project was to make something big: I made a leaning bookcase and a shoe rack."],
  ["wk6.html", "img/wk6/wk6_thumbnail.jpg", "Week 6", "My week 6 project was to design the Hello World board, and I also designed (but didn\"t make) a Li-ion battery charger."],
  ["wk7.html", "img/wk7/wk7_thumbnail.jpg", "Week 7", "My week 7 project to mold and cast something ended without my completing the nice food mold I\"d hoped for. However, I made a cool key!"],
  ["wk8.html", "img/wk8/wk8_thumbnail.jpg", "Week 8", "My week 8 embedded programming project ended up being learning how to use the Watchdog Timer."],
  ["wk9.html", "img/wk9/wk9_thumbnail.jpg", "Week 9", "For output devices, I broke a fan and made a stepper motor driver."],
  ["wk10.html", "eagle/Microphone/Mic_Hello_World/mic_hello_world_traces.png", "Week 10", "For my week 10 input devices project, I designed a Hello World example for the I2S MEMS microphone."]
]