Bill of Material

Follows a bill of material for the final bird prototype. It does not include tape or wires. The total price corresponds to only the price of the bird. The serial board corresponds to adding an extra board, which is included in between ().

Note also that these prices are for the smallest amount needed, which means that in batch, the full price is actually lower (up to half of this BOM). However, when doing the project by onself, batch payment does not make sense. This is why this listing may seem larger than what is shown on the fab inventory.

Component Quantity Unit Price Total Price
Board 2 31.12 (62.24)
Double-sided FR1 board 2 2.5 5.0
nRF24 1 1.2 1.2
ATMega328p 1 2.11 2.11
ADXL343 1 3.21 3.21
Switch 2 1.06 2.12
5V/1A regulator 1 0.5 0.5
3.3V/0.1A regulator 1 1.02 1.02
10uF capacitor 4 0.25 1.0
1uF capacitor 1 0.25 0.25
0.1uF capacitor 4 0.3 1.2
10k resistor 4 0.1 0.4
1k resistor 2 0.1 0.2
0 ohm resistor 1 0.1 0.1
Green LED 1 0.34 0.34
Blue LED 1 0.4 0.4
20MHz resonator 1 0.63 0.63
3x2-pins header 7 0.83 5.81
2x2-pins header 2 0.79 1.58
Female header 1 (2x4) 4.05 4.05
Wings and Body
3kg, 0.05s servo motor 1 24.08 48.16
3/32in steel rod 3 feet 7.25 7.25
4ftx2ft ripstop cloth 1 5.0 5.0
Acrylite 32"x12" 15.08
CR123A Streamlight batteries 2 ~1.72 ~3.44
Total ~110.0 (141.0)