01: Computer-Controlled Cutting
variable : POWER
variable : SPEED
I wanted to make an ever-growing structure out of the cardboard. Starting from the unit thickness 1/16", I doubled up the unit up to 1/2" thickness, which made four steps of hierarchy.
Each component has one inlet and seven outlets. Inlets meet with the board below,
which is always two times bigger; outlets meet with the board above, which is two times smaller.
At first, I thought of gluing boards together before cutting it, but I soon
realized that I do not need glue at all! The components were fit tighter and tighter as I assemble them.
