>VALUE Ground Supply Symbol Small Outline Package >NAME >VALUE Dual In Line Package >NAME >VALUE HP-VFQFP-N20 Micro Lead Frame package (MLF) >NAME >VALUE 1 >NAME >VALUE PIN HEADER >NAME >VALUE 1 CAPACITOR >NAME >VALUE >NAME >VALUE CAPACITOR >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE >NAME >VALUE >NAME OMRON SWITCH >NAME >VALUE 1 2 3 4 >VALUE >NAME >NAME >VALUE MISO SCK RST VCC MOSI GND non-polarized capacitor >NAME >VALUE >NAME >VALUE (Black) (Green) >NAME >VALUE >NAME >VALUE Resistor (US Symbol) Variants with postfix FAB are widened to allow the routing of internal traces OMRON SWITCH LED 1206 pads (standard pattern) >NAME >VALUE LED1206 FAB style (smaller pads to allow trace between) >NAME >VALUE 5mm round through hole part. >NAME >VALUE >NAME >VALUE CAPACITOR chip >NAME >VALUE LED >NAME >VALUE LED Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE SUPPLY SYMBOL Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version.