This is my first sketch of the final design I am trying to implement. I want to make a basketball sleeve that can predict your shot power and accuracy. It will tell you on an app the release time and speed, how likely it is to go in, and on an LED strip will show the accuracy. The first sketch is shown.
I also tried to render the sketch as a 3D model in TinkerCAD but was not able to get much going because of its limited options. This was simple two cylinders at an angle to represent an arm with a sleeve
I designed a board case so that my board remains protected and stable. I used solidworks to create the case. I took measurements with a ruler and calipers and the case fit pretty well into my board.
Base Solidworks Part
I also created a 3d top to compare to that of my molding and casting week.
