#include <BMP280_DEV.h>

BMP280_DEV bmp280(15); // Instantiate (create) a BMP280 object and set-up for I2C
float temperature; //variable for temperature
float pressure; //variable for pressure
float altitude; //variable for alititude, but tbh, this is pretty unreliable without calibration


void setup() {
  Serial.begin(9600);
  while (!Serial);
  Serial.println("starting");
  bmp280.begin(0x77); //initialize module
  bmp280.setTimeStandby(TIME_STANDBY_2000MS); // Set the standby time to 1 sec
  bmp280.startNormalConversion(); // Start BMP280 continuous conversion in NORMAL_MODE
 Serial.println("setup done");
}

void loop() {
  if (bmp280.getMeasurements(temperature, pressure, altitude)) {
   Serial.println("temp: %f *C\t\tpressure: %f hPa\t\taltitute: %f m\n"); //, temperature, pressure, altitude);
    }
}