06 Embedded Programming

This week I explored embedded programming by making an LED blink when I press a button. A simple project for a busy week with the CS Summit etc, my main objective was to just get code onto the device. I also milled an UDPI programmer to program the PCB.

Tools: Arduino, Mods, Roland Milling Machine


I used the Arduino IDE to program the PCB I produced in week 4 through this UDPI programmer:

I used a diagram of the pin layout of the ATtiny412.

I had a small problem, and the board did not work for me, I got it with this change in the settings:

How to Make (Almost) Anything | Fall 2022