I decided to create squares that could press together for my parametric design. I explored Gram, Cuttle, and Fusion 360 software. I decided to use Fusion 360 since it made working alongside my peers easier. My initial design within 360 did not print well, and I had a lot of double lines. I also wanted a kit that could be combined to make various-sized boxes for storage. I redesigned the squares with cleaner lines and was careful about where I added constraints. This allowed me to create boxes, but the joints were flimsy and hard to construct. My next step would be to explore different joints for sturdiness.

This allowed me to create boxes, but the joints were flimsy and hard to construct. I cut them using an Epilog Laser cutter. My design was flawed and had double lines, so the fit wasn't great. My next step would be to explore different joints for sturdiness.