<b>OMRON SWITCH</b> >NAME >VALUE 1 2 3 4 <h3>Plated Through Hole - 2x5 No Silk Outline</h3> <p>Specifications: <ul><li>Pin count:10</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): <ul><li>CONN_05x2</li> </ul></p> >NAME >VALUE LED1206 FAB style (smaller pads to allow trace between) >NAME >VALUE >NAME >VALUE <b>Fusion 360 Electronics Design Rules</b> <p> Die Standard-Design-Rules sind so gewählt, dass sie für die meisten Anwendungen passen. Sollte ihre Platine besondere Anforderungen haben, treffen Sie die erforderlichen Einstellungen hier und speichern die Design Rules unter einem neuen Namen ab. <b>Fusion 360 Electronics Design Rules</b> <p> The default Design Rules have been set to cover a wide range of applications. Your particular design may have different requirements, so please make the necessary adjustments and save your customized design rules under a new name. Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 9.7.0 new layer stackup definition has been added, which will not be loaded with this version. Since Version 9.7.0 new active CAMJOB file name has been added, which will not be loaded with this version. Since Version 9.7.0 board construction lines has been added, which will not be loaded with this version. Since Version 9.7.0 new design rule definitions have been added, which will not be loaded with this version.