HTMAA 2023 > EECS Group Assignments > Week 5
Electronics Production
Design Rule Characterization
- Board size must be within 5" X 4".
- If using vias, holes must have a size of 0.8mm or 1.5mm for rivets.
- Minimum distance between tracks and pads must be 1/64", or 16 mils.
- Limited to two layers, front and back of copper board, if using double sided board.
PCB Production
For this week, Bowen volunteered to send his PCB out to a board house for production. The schematic, layout, and result are seen here:
