# Avocado Clicker

## Overview
For my girlfriend and I's upcoming 2 year anniversary, I'm going to make her an avocado that has a seed as a button. When you click the seed, it will play a random sound-byte that I've recorded.

### Starting out

I first traced an avocado with a spline and revolved it 180 degrees. I repeated the same process for the avocado seed; however, I added a loft so that the button wouldn't fall out of the avocado. I also added a shell to the avocado whole, and then did a cut of the seed into the whole. After this, I split the avocado in half so that I could insert the button and the seed. I also added a rectangular prism to hold the button.



### Printing

I threw the cad into Prusa, cut it into pieces, laid them flat, and added some support material. Very straight forward. 


#### Cutting

The rectangular prism component ended up being too large to fit the button, so I turned on the heat gun to warm up the plastic and cut some of it off with the razor blade.


### Assembly

I glued the button to the rectangular prism, inserted the seed, and then superglued the backplate on.



I drew a smily face


![]()

# 3D Scan of Avocado Plush

I scanned an avocado plush that my girlfriend got me.