>NAME >VALUE >NAME >VALUE <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b><p> wave soldering >NAME >VALUE >NAME >VALUE <b>Power TOPLED®</b><p> Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf >NAME >VALUE R G B A <b>Power TOPLED®</b><p> Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf >NAME >VALUE R G B A LED 1206 pads (standard pattern) >NAME >VALUE LED1206 FAB style (smaller pads to allow trace between) >NAME >VALUE 5mm round through hole part. >NAME >VALUE <b>SOT-223</b> >NAME >VALUE <b>CAPACITOR</b> >NAME >VALUE >NAME >VALUE <b>CAPACITOR</b> >NAME >VALUE >Value >Name >Name >Value >Name >Value 1 >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE LED >NAME >VALUE >NAME >VALUE non-polarized capacitor >NAME >VALUE USB >Name >Value >NAME >VALUE The SAM D21 is a series of low-power microcontrollers using the 32-bit ARM® Cortex® -M0+ processor, and ranging from 32- to 64-pins with up to 256KB Flash and 32KB of SRAM. The SAM D21 operate at a maximum frequency of 48MHz and reach 2.46 CoreMark® /MHz. <a href="https://pricing.snapeda.com/parts/ATSAMD21E18A-AF/Microchip/view-part?ref=eda">Check prices</a> <b>Resistor (US Symbol)</b> <p> Variants with postfix FAB are widened to allow the routing of internal traces LED SMD micro USB connector as found in the fablab inventory. Three footprint variants included: <ol> <li> original, as described by manufacturer's datasheet <li> for milling with the 1/100" bit <li> for milling with the 1/64" bit </ol> <p>Made by Zaerc. <B>Supply & Ground symbols Ground (GND) Arrow >VALUE <b>SUPPLY SYMBOL</b> - Ground (GND) Arrow >VALUE Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version.