2x4 header. Meant for nRF24L01+, but could be used for any header or 2x4 part. Extra-wide pads for greater durability in soldering. <b>Pin Headers,Terminal blocks, D-Sub, Backplane, FFC/FPC, Socket <b>PIN HEADER</b> >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE PIN HEADER PIN HEADER <b>Fusion 360 Electronics Design Rules</b> <p> Die Standard-Design-Rules sind so gewählt, dass sie für die meisten Anwendungen passen. Sollte ihre Platine besondere Anforderungen haben, treffen Sie die erforderlichen Einstellungen hier und speichern die Design Rules unter einem neuen Namen ab. <b>Fusion 360 Electronics Design Rules</b> <p> The default Design Rules have been set to cover a wide range of applications. Your particular design may have different requirements, so please make the necessary adjustments and save your customized design rules under a new name. Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version. Since Version 9.7.0 new layer stackup definition has been added, which will not be loaded with this version. Since Version 9.7.0 new active CAMJOB file name has been added, which will not be loaded with this version. Since Version 9.7.0 board construction lines has been added, which will not be loaded with this version. Since Version 9.7.0 new design rule definitions have been added, which will not be loaded with this version.