<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> <p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> <h3>Obligatory Warning</h3> <p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> <h3>License</h3> <p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> <p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. </p> >NAME >VALUE >VALUE >VALUE >DRAWING_NAME >LAST_DATE_TIME >SHEET Sheet: Adafruit Industries Drawing: >AUTHOR BNO080 Motion Co-Processor VDD: VDDIO: Op. Temp: -40~85°C 2.4-3.6 1.7-3.6 >NAME >VALUE Ext XTAL: CSEL0=0/NC,CSEL1=XTAL Ext CLK: CSEL0=1,CSEL1=1 Int Osc: CSEL0=1,CSEL1=0/NC 32.768kHz Source PS1 PS0 MODE 0 0 I2C 0 1 UART-RVC 1 0 UART 1 1 SPI Bus Select <b>GND</b> <b>3.3V Supply</b> Frame A4 <p><b>BNO080</b> - Motion Co-Processor</p> <b>Supply Symbols</b><p> GND, VCC, 0V, +5V, -5V, etc.<p> Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals.<p> The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> <author>Created by librarian@cadsoft.de</author> >VALUE <b>SUPPLY SYMBOL</b> <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b><p> wave soldering >NAME >VALUE >NAME >VALUE LED 1206 pads (standard pattern) >NAME >VALUE LED1206 FAB style (smaller pads to allow trace between) >NAME >VALUE 5mm round through hole part. >NAME >VALUE <b>CAPACITOR</b> >NAME >VALUE >NAME >VALUE <b>CAPACITOR</b> >NAME >VALUE >NAME >VALUE LED >NAME >VALUE non-polarized capacitor >NAME >VALUE <b>Resistor (US Symbol)</b> <p> Variants with postfix FAB are widened to allow the routing of internal traces LED <b>Pin Headers,Terminal blocks, D-Sub, Backplane, FFC/FPC, Socket <b>PIN HEADER</b> >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE PIN HEADER PIN HEADER PIN HEADER PIN HEADER >NAME >VALUE >NAME >VALUE <b>PIN HEADER</b> <b>PIN HEADER</b> Pullups ON LED Since Version 6.2.2 text objects can contain more than one line, which will not be processed correctly with this version. Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.