This week I refer the Neil’s hello.D11C-serial  board design. I had never designed a board before and have no electronic background. I didn’t know where to start. 

So I just followed Jake’s eagle tutorial to design the board, but I followed Neil’s components and schematics.

But still, I didn’t know where to put the Led and switch button. And also, In the tutorial video, Jake used the Via, so I followed exactly the same what Jake did using Via. But I didn’t know if I wanted to use Via. I need a double copper board that we don’t have in Archsite. 

So I decide to redesign the board again. This time, I wanted to use Hello.D11C-echo, a much simpler design than the previous design.

I designed the trace only using a curved line which I like with circular outline. 

I exported two separate PNG images, one trace and another outline. 

I uploaded PNG images on the mode and successfully milled the board. 

I gathered the components and soldered them. Finally, I created the first electronic board in my life.