Today,
we learned how to make almost anything.
Tomorrow,
we're going to make almost everything.
Here's the story of how we got there.
For my final project I built a hardware password manager. Here's a summary page.
For my final project I'm looking to build a hardware password manager. Here's a log of things I've done to that end.
This week we did computer-controlled cutting, learning how to use a vinyl cutter and learning how to use a laser cutter. I describe what I did with both.
This week we did PCB milling (from copper-coated resin) and surface-mount soldering, creating an AVR microcontroller programmer from a provided schematic and parts. I describe here what happened.
This week we did 3D scanning and printing. I describe what I tried as well as what happened.
This week we did electronics design, modifying a minimal example board with an ATtiny44 to support a LED and push-button switch. I describe what I did.
This week we learned how to use a CNC router to perform large-format machining. I describe what I did.
This week we learned about how to program our boards to do things. I describe what I did.
This week we learned about how to create molds in order to cast parts. I describe what I did.
This week we learned about various types of output devices. I describe what I did.
This week our section collectively worked on a single machine. I describe my contribution.
This week we investigated input devices. I describe what I did.
This week we discussed ways to interface with hardware devices from computer software. I describe what I did.
This week we discussed ways for microprocessors and microcontrollers to communicate with each other. I describe what I did.
This week we learned how to fabricate composite parts. I describe what I did.