3D scanning and printing
Scaning a plastic propeller and printing a gear for an automatic curtain mechanism
3D Scanning
For my scanning, I used this propeller that I also used to power the cardboard plane that I make for project 2
Some photos from the scanning process
The scan wasn't good enough so I had to clean and cover the holes to the extent where I almost redesigned it in !
3D Printing
A friend of mine wanted to automate the curtains in his room, and so the first step was to design and print a gear that fits the bead chain
After 30 minutes of printing
and Here's a demonstration...
3D Printing
A friend of mine wanted to automate the curtains in his room, and so the first step was to design and print a gear that fits the bead chain
After 30 minutes of printing
and Here's a demonstration...