box-9

Molding & Casting

By Dan Chen, September 12, 2014

For this week’s assignment I was thinking about making something that reminds me of the San Francisco beach. I started with the idea of using ocean waves image as displacement map or bump map then create meshes from it. I tried this meth on Maya and Solidworks, but I wasn’t able to convert them to an useful mesh.

 

I decided to create the waves in Maya using the soft selection tool. I was able to select vertexes and vertexes around the point to moving the surfaces in or out. I end up with nice looking wavy model.

Screen Shot 2014-10-18 at 9.30.30 PM Screen Shot 2014-10-18 at 8.44.26 PMScreen Shot 2014-10-18 at 8.44.18 PM Screen Shot 2014-10-18 at 9.29.35 PM  Screen Shot 2014-10-18 at 9.31.46 PM

I can not find a good way to export .stl file from Maya, so I had to enable the .obj export then open and convert the file from MeshLab.

I was trying to smooth out my wave model but accidentally discover the “Random vertex displacement” option along with other options as well. I used it to create a more geomatic shape thinking that the 1/4 end mill would reproduce the shape.

Screen Shot 2014-10-18 at 11.45.37 PM Screen Shot 2014-10-19 at 12.14.01 AM

After I did the Random vertex displacement, I saved the model as .stl, then open it in SolidWorks to cut a rounded hole in the middle.

Screen Shot 2014-10-21 at 12.58.57 PMScreen Shot 2014-10-21 at 12.54.22 PM

ShopBot-ing

I used the ShopBot to cut my piece. Since the foam depth might not be deep enough, I spread glue 2 pieces of foam together just incase. At 13000 RPM, the rounded end mill was able to cut smoothly without any trouble. The 1/4 inch end mill however did not leave enough resolution for me, but it cuts much faster.

IMG_9766

After about 45 minutes, this is the end result.IMG_9779

Molding & Casting

I mixed a large batch of OOMOO at 1 to 1 ratio evenly to make my negative mold. I end up using 1.5 sets of OOMOO to create the negative mold .

 

IMG_9783

1.5 hours later, OOMOO becomes pretty hard. In order to get my negative mold out, I used the air gun to break the edge first, then break the mold apart from the side and the bottom. Since my mold is made up if 2 pieces of foam, I can just break them apart fairly easily.

IMG_9800IMG_9802 IMG_9801

For casting, I used the laser cutter to cut out the fence, which is 8″X8″. It is a clean and fast way to make the reusable walls. I then pour and clamp the mold to position. I was able to make 2 castes in 3 hours using Drystone. 5 Part Drystone Powder and 1 part water.

IMG_9805 IMG_9806IMG_9818 IMG_9816IMG_9811 IMG_9814

Spread Paint

I applied 4 coats of paint, 15 minutes between coats.

IMG_9821 IMG_9822IMG_9825

Assembling

I placed a piece of laser etched acrylic in the middle, it has a water ripple  texture to it. To make the edge more organic I made the edges uneven using a drum stander.

IMG_9836IMG_9834

Lighting

I was trying to use the ATtiny44 board that I programed last week for the lighting, using PWN to simulate the ocean wave, but it was too big and I broke the ISP port. I end up using the large LEDs in the lab with a 1.5 battery.

IMG_9844 IMG_9845

IMG_3558