For my final project, I want to make a portable pop-up projector table. I want there to be some interactive and creative (as in, people who see my project can create something themselves) element as part of the experience

Goal#

• Write an application that interfaces a user with an input &/or output device that you made

Result:#

Code

Goal#

• Design, build, and connect wired or wireless node(s) with network or bus addresses

Result:#

Goal#

• Add an output device to a microcontroller board you've designed, and program it to do something

Result:#

Goal#

• Measure something: add a sensor to a microcontroller board that you have designed and read it

Result:#

Here are my design files at the end of this week but DO NOT bother milling them, I later realized they were wrong

Goal#

• Design a mold around the stock and tooling that you'll be using,
• Mill it (rough cut + (at least) three-axis finish cut),
• Use it to cast parts

Result:#

Ambiguous Cylinder STL file

Goal:#

Read the data sheet for your microcontroller and program your board to do something

Result:#

.ino File

D11C14A bootloader

Goal#

redraw an echo hello-world board, add (at least) a button and LED (with current-limiting resistor) check the design rules, make it, and test that it can communicate

Result#

Eagle Files

Goal#

MAKE SOMETHING BIG

Result#

.f3d File

Goal#

• Design and print a 3D object that could not be made using subtractive methods
• 3D scan an object (and optionally print it)

Result:#

STL File

But better than downloading my file, why don't you make a torus knot that represents you? I made a short personality quiz (at thais.dev/selfToken) that you can answer and see what your unique torus knot will look like. You can optionally click on the model to save it as a gLTF file, which you can convert to STL using a conversion tool if needed.

Goal#

Mill Neil's design of the D11C Serial Programmer

Result:#

Goal#

Make a press-fit construction using the laser cutter, make anything using the vinyl cutter.

Results#

SVG File Image File

Goal:#

Think of a final project idea and sketch it.

Result:#

DXF File