Austin S Lee

HOW TO MAKE (ALMOST) ANYTHING MAS.863.12

NETWORKING AND COMMUNICATIONS- week13

This week I worked on networking and communications. I had my potentiometer generate txt file. I connected my laptop to another mac-mini through ethernet cable and had the public folder shared. The idea was to have an Fabduino generate the input value through the txt file and have another arduino connected to the other computer to have an output using the txt file. I was able to generate txt files successfully, and have the networked computer read the txt file. However, it only read once and would not continue to obtain the value. Another issue was the unstability of the potentiometer's value. My solution was to use Griffin Technology's PowerMate knob. I was able to customize the knob value to become mouseX input. Here is the source code.

FINAL PROJECT PROPOSAL.
My ideas for the final project- week1

PRESS-FIT CONSTRUCTION KIT.
Learn how to make something using vinyl cutter and laser cutter - week2

FAB ISP (IN-SYSTEM PROGRAMMER)
Learn how to make a custom PCB - week3

3D SCANNING AND PRINTING.
Learn how to make 3D printed model - week4

ELECTRONICS DESIGN.
Learn how to redraw the echo hello-world board - week5

MOLDING AND CASTING.
Learn how to design a 3D mold, machine it, and cast parts from it - week6

EMBEDDED PROGRAMMING.
Learn how to program a custom board to do something - week7

MAKE SOMETHING BIG.
Learn how to make SOMETHING BIG through computer-controlled machining- week8

INPUT DEVICES.
Learn how to add sensor to a microcontroller board and read it - week9

COMPOSITES.
Learn how to assemble a 3D mold, and lay up a fiber composite part in it - week10

OUTPUT DEVICES.
Learn how to add an output device to a microcontroller board and program it to do something - week11

INTERFACE AND APPLICATION PROGRAMMING.
Learn how to write an application that interfaces with an input &/or output device - week12

NETWORKING AND COMMUNICATIONS.
Learn how to build a wired &/or wireless network with at least two nodes - week13

MECHANICAL/MACHINE DESIGN.
Learn how to design or modify a machine and automate the machine - week14

FINAL PROJECT.
My final project for How To Make (almost) Anything - week15, 16

MAS.863
Learn about the How To Make (almost) Anything course at MIT